This Plow Harness will accept all Craig models of snow plows: one way, vee plow, reversible and dozer blades.

• Up to 17" of lift
• Extra strong gusseted A-Frame
• Rugged 4″ double acting cylinder
• Optional down pressure kit for vee plow available

The Craig Universal Plow Harness features all of the great rugged design features of our standard 100PH while allowing you the flexibility of picking up all Craig Champion and Viking style plows. It’s available for all major grader brands and is ideal for extending the usable life of your existing stock attachments.

• Drop blocks included (blocks stored on harness when not in use)
• Up to 17" of lift
• Extra strong gusseted A-Frame
• Rugged 4″ double acting cylinder
• Optional down pressure kit for vee plow available

The Craig 1072 Series plows are the next generation of rugged one way Craig blades built for today’s high speed machines. This plow is the modern version of the long heralded 670 Series and remains true to that plow’s history of trouble-free operation and structural integrity. Equipped with a solid push frame and triangular trip mechanism this plow is ideal for heavy public works use. With factory equipped manual moldboard pitch and wear shoe adjustment it’s easy to get the perfect operating setup for your application.

The 1072 Series of plows meet all tender specifications previously reserved for the Craig 670 series.

• 11° moldboard ‘angle of attack’ adjustment
• 37° moldboard angle to road (by direction of travel)
• 2 bolt manual shoe adjustment
• High wear hardened steel plate wear shoes
• Heavy duty triangular trip mechanism

When you need nothing but the absolute best for your fleet, the Craig 1073 Series is your solution. Derived from more than 70 years of working hand-in-hand with Department of Transportation representatives across North America, this plow series is the benchmark for durability under harsh conditions.

The 1073 Series of plows meet all tender specifications previous reserved for the Craig 773 Series.

• Extra heavy construction with doubled moldboard ribs
• 13° moldboard ‘angle of attack’ adjustment
• 37° moldboard angle to road (by direction of travel)
• Stainless steel ‘no tools’ shoe adjustment
• Ultra high wear cast wear shoes
• Rubber deflector
• Heavy duty high visibility kit
• Heavy duty triangular trip mechanism

The 300 Series Postless Wing Assembly has been designed for maximum operator visibility and safety. Using a parallel arm design, the front lift provides 40" of level benching height and is available in three pitch adjustment configurations. Non-adjustable, manually adjustable and hydraulic adjustable pitch control options available to fit your specifications and your budget.

• Available with a 12, 13 or 14 foot moldboard
• Hydraulic push pole adds up to 34" (standard) of increased reach
• Mechanical floating front slide allows constant road contact
• Excellent operator visibility
• Provides excellent flow from grader moldboard
• Fully hydraulic design (no cables)

Designed for maximum operator visibility and safety, the Craig Severe Service Postless Wing Assembly is the ultimate in grader snow removal gear for the harshest winter conditions. Featuring a super duty push pole design and open back wing moldboard with torque tube construction, the 300SS is designed to spec for the western Canadian market.

Available in three pitch adjustment configurations – non-adjustable, manually adjustable, and hydraulically adjustable.

• Available with a 12 or 13 foot moldboard
• Hydraulic push pole adds up to 31-3/4" (standard) of increased reach
• Mechanical floating front slide allows constant road contact
• Excellent operator visibility
• Provides excellent flow from grader moldboard
• Fully hydraulic design (no cables)
• 29" adjustable bench height
• Pre-tensioned push pole spring for added stability

The perfect curl of our wing moldboard is still based on the magic formula we found in the 50′s for unparalleled snow curl and discharge.

• Available with a 12, 13 or 14 foot moldboard
• 48" level benching height
• Hydraulic push pole adds up to 22" (standard) of increased reach
• Mechanical floating front slide allows constant road contact
• Wing moldboard features rugged box style construction for maximum strength and light weight
• Provides excellent flow from grader moldboard
• Easy installation and removal can be done in the field
• Fully hydraulic design (no cables)

Based on our popular 301 Wing Assembly, the Craig 301 Underslung Wing offers increased visibility and moldboard angle over the standard 301. The front post is attached behind the articulation point, allowing the grader to maintain a full range of motion while turning left or right with the wing in any position.

• Available with a 12, 13 or 14 foot moldboard
• 30" level benching height
• Hydraulic push pole adds up to 22" (standard) of increased reach
• Mechanical floating front slide allows constant road contact
• Wing moldboard features rugged box style construction for maximum strength and light weight
• Provides excellent flow from grader moldboard
• Fully hydraulic design (no cables)
• Maintain the ability to access the cab from either side

Extend the capabilities of your grader with an all hydraulic high lift rear post wing assembly. Featuring an amazing 60" level benching height, this assembly allows operators to double bench snowbanks for more efficient plowing.

• 60" level benching height
• Hydraulic push pole adds up to 22" (standard) of increased reach
• Floating front slide allows constant road contact
• Excellent operator visibility
• Wing moldboard features rugged box style construction for maximum strength and light weight
• Provides excellent flow from grader moldboard
• Easy installation and removal can be done in the field
• Fully hydraulic design (no cables)

Craig Front Mount 302 Wing assemblies are designed to mount to the grader ahead of the articulation point to allow for superior traction and visibility.

• 60" level benching height
• Hydraulic Push Pole adds up to 22" (standard) of increased reach
• Floating front slide allows constant road contact
• Excellent operator visibility
• Wing moldboard features rugged box style construction for maximum strength and light weight
• Easy installation and removal can be done in the field
• Fully hydraulic design (no cables)

Designed specifically for 40 series graders and up, this heavy duty wing assembly has all the great features of the 301 wing assembly in an extra heavy duty package.

• Available with a 14 foot moldboard
• 48" to 60" level benching height (depending on machine make and model)
• Hydraulic push pole adds up to 22" (standard) of increased reach
• Mechanical floating front slide allows constant road contact
• Wing moldboard features rugged box style construction for maximum strength and light weight
• Provides excellent flow from grader moldboard
• Easy installation and removal can be done in the field
• Fully hydraulic design (no cables)

Simply the best built, most rugged vee plow available on the market today. Used exclusively for opening some of the worst roads in the north. This plow has been, and continues to be, a mainstay of government and private industry for ensuring that roads stay clear during the worst storms, or for opening roads that have not seen a plow for most of the winter season.

• Smooth formed moldboard promotes efficient plowing action
• Three adjustable, replaceable skid shoes
• Available in 9 to 12 foot widths
• Optional down pressure kit available

Features a very aggressive conical moldboard. This plow has been designed specifically for highway use. The large difference between intake and discharge heights results in superior snow curl and discharge at high speeds.

• Features a unique trip that jumps up and back to clear obstacles
• Replaceable adjustable wear shoes
• Can be ordered in either Craig Quick Hitch or Push Pole hook-up
• Hydraulic adjustable pitch available (requires additional valve)

The result of over 70 years of design experience, this reversible is the industry leader in snow equipment for graders to this day. The full floating frame follows the contour of the road both laterally and horizontally to ensure maximum contact.

• Trip moldboard standard, optional trip edge available
• Replaceable wear shoes and cutting edge for long wear life
• Can be ordered in either Craig Quick Hitch or Push Pole hook-up
• Angles 30° to the left and right
• Available in various widths
• Rugged 4" cylinders

Available in 8 to 10 foot blades, this fixed dozer blade works with our standard lift group plow harness.

• Reversible replaceable steel cutting edge
• Extra thick moldboard eliminates moldboard flex and ensures long wear life